Protherm Bobor 30DLO

Product detailed description

Stationary cast iron boiler BOBOR & nbsp; 30DLO & nbsp; for solid fuels (coal and wood), built-in thermomanometer, automatic thermomechanical power regulator, chimney flap, primary and secondary air supply, overpressure safety device (as an accessory) in closed pump systems), large combustion chamber, high efficiency.

& nbsp;

Features:

& nbsp;

• cast iron exchanger
• reduction of temperature losses
• easy maintenance and assembly
• easy refueling
• 18 - 45 kW wood
• 19 - 48 kW coal

& nbsp;

BOBOR boilers can also be used for wood When burning coal, the heat output of the boiler will increase by an average of up to 10%. In the case of wood, good combustion is achieved by using dry wood with a diameter of 100-105 mm. The boilers are easy to operate, maintain and highly efficient due to the large combustion chamber. & Nbsp;

& nbsp;

Regulation
The thermostatic regulator is securely located on the upper & nbsp; cover of the boiler and thus protects the eyes from possible damage from the hot air escaping from the boiler when refueling the combustion chamber.

& nbsp;

High comfort
Many households currently have a compensation system & nbsp; gas boiler trying & nbsp; find a cheaper alternative. & nbsp; The advantage is a system that will be loaded from a solid fuel boiler and a gas boiler. The solid fuel boiler is used & nbsp; mainly for & nbsp; temperature control during autumn and slightly cold winter days, and in the event of temperatures falling well below freezing, the gas boiler is switched on.

& nbsp;

< strong> Safety of operation
The mandatory equipment of the boiler in closed systems is the aftercooling circuit, which ensures the protection of the boiler against & nbsp; overheating. Prevents the boiler temperature from exceeding 110 ° C.

& nbsp;

Insulation

& nbsp; The cast iron body of the boiler is coated with inorganic cotton wool insulation with aluminum foil, thus minimizing heat loss and increasing & nbsp; boiler efficiency.
& nbsp;